Endless hot water, lower gas bills, and your utility room floor back.
A tankless water heater heats water only when you turn on the tap — no tank sitting there keeping 40 or 50 gallons hot around the clock just in case. The result is endless hot water: back-to-back showers, the dishwasher running while someone showers, and no more scheduling your family’s mornings around the tank’s recovery time.
Because there is no standby heat loss, a tankless unit uses meaningfully less gas than a conventional tank doing the same job. It also frees up real floor space — a tankless unit mounts on the wall, giving you back the footprint that a bulky tank used to occupy in your utility room.
The honest comparison: a traditional tank costs less upfront and is simpler to install, but it heats water all day whether you use it or not, and tanks typically need replacement every 10 to 12 years. A tankless unit costs more installed, but it only burns gas when hot water is actually flowing, it takes up a fraction of the space, and with regular maintenance it often lasts 20 years or more — roughly double a tank’s lifespan.
For households with high hot water demand, limited space, or plans to stay in the home long-term, tankless usually wins on total cost of ownership. For a rental property or a short-term situation, a tank is sometimes the practical choice — and we will tell you that straight.
Most GTA homes can take a tankless unit, but three things need checking. First, gas supply: tankless heaters need a larger gas line than a tank did, because they burn more gas in short bursts. We verify your gas meter and line capacity during the assessment.
Second, venting: high-efficiency condensing units vent through the wall with sealed PVC or polypropylene, which is straightforward in most homes but needs proper routing and clearances. Third, water quality: very hard water shortens any water heater’s life, and tankless units benefit from a service valve setup that makes annual descaling simple. We check all three before quoting — a tankless installed without this homework is where the horror stories come from.
Tankless sizing is not about gallons — it is about simultaneous demand. We size your unit by flow rate: how many showers, taps, and appliances might run hot water at the same time during your household’s busiest hour, adjusted for our cold incoming groundwater in winter (colder incoming water means the unit works harder to reach temperature).
Undersize it and someone gets a cold surprise when the dishwasher kicks on mid-shower. We ask about your household’s real routines — not a generic chart — and size the unit so peak demand is covered with margin to spare.
We install tankless water heaters from Rinnai and Navien — the two brands our field experience keeps bringing us back to. Both offer high-efficiency condensing models with strong warranties, reliable parts availability across Ontario, and smart recirculation options that deliver hot water faster to distant bathrooms.
We will recommend the specific model that matches your home’s demand and venting situation, and we will explain why — no alphabet soup, just the unit that fits your house.
We remove and dispose of your old tank, mount the new unit on the wall with proper clearances, and run the gas line sized for the unit’s full demand — this is the step that separates a professional install from a problematic one. Venting goes in to manufacturer spec with correct slope and termination clearances, condensate drains properly, and we install service valves for easy future maintenance.
Then we commission: gas pressure verified, temperature set to a safe and comfortable level, every hot tap in the house tested, and the recirculation programmed if you chose it. We show you the descaling schedule and leave you with a system ready for years of service.
End the cold-shower lottery for good. We will check your gas, venting, and demand, and size the right unit for your home.
Call (289) 270-4328 Get A Free Quote